IP65 LED Street Light

The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and...

Send InquiryChat Now
Product Details

The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The equivalent European standard is EN 60529.

The standard aims to provide users more detailed information than vague marketing terms such as waterproof. For example, a cellular phone rated at IP68 is "dust resistant" and can be "immersed in 1.5 meters of freshwater for up to 30 minutes". Similarly, an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. IP22 or IP2X are typical minimum requirements for the design of electrical accessories for indoor use.

The digits indicate conformity with the conditions summarized in the tables below. The digit 0 is used where no protection is provided. The digit is replaced with the letter X when insufficient data has been gathered to assign a protection level.

 

This table shows what each digit or part of the IP code represents.(part)

IP indication

First digit: Solid particle protection

Second   digit:Liquid ingress protection

IP

Single   numeral: 0–6

Single   numeral: 0–9

Mandatory

Mandatory

Mandatory

 

First digit: Solid particle protection

The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects.

Level sized

Effective against

Description

0

No   protection against contact and ingress of objects

1

>50 mm

Any   large surface of the body, such as the back of a hand, but no protection   against deliberate contact with a body part

2

>12.5 mm

Fingers   or similar objects

3

>2.5 mm

Tools,   thick wires, etc.

4

>1 mm

Most   wires, slender screws, large ants etc.

5

Dust protected

Ingress   of dust is not entirely prevented, but it must not enter in sufficient   quantity to interfere with the satisfactory operation of the equipment.

6

Dust tight

No   ingress of dust; complete protection against contact (dust tight). A vacuum   must be applied. Test duration of up to 8 hours based on air flow.


Second digit: Liquid ingress protection(part)

Level

Protection against

Effective against

Details

0

None

1

Dripping water

Dripping   water (vertically falling drops) shall have no harmful effect on the specimen   when mounted in an upright position onto a turntable and rotated at 1 RPM.

Test duration:   10 minutes 

Water equivalent to 1 mm   rainfall per minute

 

2

Dripping   water when tilted at 15°C

Vertically   dripping water shall have no harmful effect when the enclosure is tilted at   an angle of 15° from its normal position. A total of four positions are   tested within two axes.

Test duration: 2.5 minutes for   every direction of tilt (10 minutes total)

Water equivalent to 3 mm   rainfall per minute

 

3

Spraying   water

Water falling as a spray at any   angle up to 60° from the vertical shall have no harmful effect, utilizing   either: a) an oscillating fixture, or b) A spray nozzle with a   counterbalanced shield.

Test a) is conducted for 5   minutes, then repeated with the specimen rotated horizontally by 90° for the   second 5-minute test. Test b) is conducted (with shield in place) for 5   minutes minimum.

 

For a Spray Nozzle:

Test duration: 1 minute per   square meter for at least 5 minutes
  Water volume: 10 litres per minute
  Pressure: 50–150 kPa

For an oscillating tube:

Test duration: 10 minutes

Water Volume: 0.07 l/min per   hole

 

4

Splashing   of water

Water splashing against the   enclosure from any direction shall have no harmful effect, utilizing either:   a) an oscillating fixture, or b) A spray nozzle with no shield.

Test a) is conducted for 10   minutes. Test b) is conducted (without shield) for 5 minutes minimum.

 

Oscillating   tube: Test duration: 10 minutes, or spray nozzle (same as IPX3 spray nozzle   with the shield removed)

5

Water   jets

Water   projected by a nozzle (6.3 mm) against enclosure from any direction   shall have no harmful effects.

Test duration: 1 minute per square   meter for at least 15 minutes

Water volume: 12.5 litres   per minute
  Pressure: 30 kPa at distance of 3 m

 

Our LED IP level is IP65,our production is strictly in accordance with IEC standards.

If you are interested in any of our products,please contact us directly!


Factory information: 

Welcome to our factory !

Factory Name

Jiangsu Changcheng Cable Co.,Ltd

Location

Lingtang Town,Yangzhou,Jiangsu ,China

Establishes in

1990,more than 25 years’ experience in cable manufacturing

Export office location

Yunhe Building,Hanjiang Area,Yangzhou,China

Our main products

Control cable

Instrumentation cable

Power cable

Cable and electrical wires for installation

High temperature cable

Flame retardant and Fire-resistant cable

Special cable

Cable tray

Street lighting

Hot Tags: IP65 LED street light, China, suppliers, manufacturers, factory, wholesale, customized, cheap, low price
Related Products
Inquiry