Single Core PVC Insulation Installation Wire

​Single copper conductor core PVC insulation electrical wire for installation with rated voltage 450/750V

Send InquiryChat Now
Product Details

Single Core PVC Insulation Installation Wire

Single copper conductor core PVC insulation electrical wire for installation with rated voltage 450/750V



Designed for use in light industrial and domestic wiring. These cables are particularly suited for installation as meter tails and are intended for fixed installation in dry or damp premises.
These cables can be installed in conduit, in cable trunking and in cable ducting. Or where there is deemed little risk of mechanical damage these cables can be clipped direct, on cable tray, embedded or in free air. These cables are not intended to be laid underground.

2. Construct 

A .Voltage rating , 450/750V

B. Conductor,  Plain, annealed copper,

C. Insulation,  PVC insulated cable

D. Insulation colour : Brown, Black, Grey, Blue, Green/Yellow or as per  order.

E. Standard,  BS6004, IEC60227-3

3.Service Characteristics

Lonq term service temperature:BV-90 and RV-90 not exceeding 90℃,

other models not over 70℃:permanently laid cables not lower than 0℃.

Bending radius allowed:for cables with outer diameters (D)lower than 25m.


4.Technical Requirements and Parameters

(1)All conductors follow the requirements specified in GB/T3956-1997“cable constructs”.

(2)PVC for insulation :PVC/E for 90℃ wires and cables;

PVC/C for the rest with the temperature at 70℃.

(3)Inner protecting layer adopts non-sulphurised rubber or plastic composite,

sheath layer adopts PVC/ST4.

(4)Product performances and test methods follow GB5023, 1, 2, 3.

(5)Refer to table 2 for DC resistance and insulating resistance of the cables.





(1) Q:Are you a factory or trading company?

A: Changcheng cable is a cable manufacturing base in Jiangsu,China,with more than 500 workers. 

(2) Q:Where is your factory located? How can I visit there?

A: Our factory is located in Yangzhou,Jiangsu,China

It is advised that you come directly by plane to Nanjing airport ,then we can arrange the driver to pack you. 

(3) Q:How can I get some samples?

A: Free Samples will be sent you by economic International Express if checked available,Freight Charge normally will be on buyer’s account. 

(4) Q:How does your factory do regarding quality control?

A: Changcheng cable group has ISO9001 and ISO14004 certificate and strict QC system,we deliver only qualified cable. 

(5)  Which payment terms do you accept?

A:When the single batch order is signed,the buyer should pay 50% as T/T within one week,then the Company will arrange the mass production.

The Company shall arrange the shipment once received the original L/C 90 days at sight from the buyer.

Hot Tags: single core PVC insulation installation wire, China, suppliers, manufacturers, factory, wholesale, customized, cheap, low price
Related Products