Wire Mesh Basket Cable Trunking

Wire Mesh Tray is lightweight, flexible and easy to install. Due to it’s small surface area there is no accumulation of dirt or humidity. Cable ventilation is perfect. There is no need for long term advanced planning and ordering. Just get straight sections of tray, a few accessories like the...

Send InquiryChat Now
Product Details

Wire Mesh Tray is lightweight, flexible and easy to install. Due to it’s small surface area there is no accumulation of dirt or humidity. Cable ventilation is perfect. There is no need for long term advanced planning and ordering. Just get straight sections of tray, a few accessories like the universal splice kit and a bolt cutter and you are ready to go. All kinds of fittings can be done onsite easily.

Wire Mesh Tray is available in many finishes and can be used in industrial and commercial environments, inside and outside.

 

Changcheng has a wire basket system to meet specific requirements.

From pre-galvanized solutions for commercial controlled interior environments, to a stainless steel version for industrial applications, such as food processing, marine and highly corrosive environments. Changcheng Wire Basket Systems will help save labor and minimize waste, while reducing impact to the environment. The painted masked version reduces on-site paint removal, saving time and money. The raised access floor system ships as a complete unit, eliminating the need to locate and assemble components. Changcheng Wire Basket Systems are available in overhead and raised floor applications.

 

Wire Mesh Basket Tray Product Specifications:

ACCEPTABLE MANUFACTURES:

Manufacturer: Subject to compliance with these specifications.


WIRE TRAY SECTIONS AND COMPONENTS

1.Provide wire basket of types and sizes indicated; with all required splicing and mounting hardware. Construct units with T-weld edges and smooth surfaces; in compliance with applicable standards; and with the following additional construction features.

A. All straight section longitudinal wires shall be constructed with a continuous top wire safety edge.

Safety edge must be T-welded on all tray sizes.

B. Wire basket cross-wire to be constructed with either flat shaped wire design or with round wire design, as directed by engineer.

Flat shaped cross wire design shall provide additional surface area for cable weight support and to avoid pressure points and strain on cables.

Round shaped cross wire design may be used in general purpose applications where cable weight and strain are not concerns.

2. Materials and Finishes: Material and finish specifications for Carbon Steel Wire and Pre-Galvanized steel wire are as follows:

A. Pre-galvanized Zinc: Straight section shall be made from pre-galvanized steel meeting the minimum mechanical properties of ASTM A 641. Material must be cleaned after fabrication to remove any soot, manufacturing residue/oils, or metallic particles.

B. Powder Coat: Straight sections shall be powder coated black with an average paint thickness of 1.2mils (30microns) to 3.0mils (75microns). Changcheng powder coat product is masked at splice points to allow conductive ground design; no field paint removal is required.

C. Stainless Steel: Straight sections and accessories shall be made from Type 304, 316 Stainless Steel (meeting the minimum mechanical properties of ASTM A 580).

D. Electro-Plated Zinc Galvanized (Post Plated) Made from Carbon Steel and plated to ASTM B 633, Type III, SC-1.

3. Wire basket shall be made of high strength steel wires and formed into a standard 2 inch by 4 inch wire mesh pattern with intersecting wires welded together. All mesh sections must have at least one bottom longitudinal wire along entire length of straight section.

4.Wire basket sizes shall conform to the following nominal criteria:

5. All fittings shall be field formed, from straight sections, in accordance with manufacturer’s instructions.

6. Wire mesh basket tray supports shall be ceiling trapeze type, center support, trapeze clips, or wall brackets as manufactured by Changcheng.

7. Special accessories shall be furnished as required to protect, support and install a wire basket support system.


Wire Mesh Cable Tray Specification:

image002

If you are interested in any of our products,please contact us directly!

 

Factory information: 

Welcome to our factory !

Factory Name

Jiangsu Changcheng Cable Co.,Ltd

Location

Lingtang Town,Yangzhou,Jiangsu ,China

Establishes in

1990,more than 25 years’ experience in cable manufacturing

Export office location

Yunhe Building,Hanjiang Area,Yangzhou,China

Our main products

Control cable

Instrumentation cable

Power cable

Cable and electrical wires for installation

High temperature cable

Flame retardant and Fire-resistant cable

Special cable

Cable tray

Street lighting

Hot Tags: wire mesh basket cable trunking, China, suppliers, manufacturers, factory, wholesale, customized, cheap, low price
Related Products
Inquiry